How to Refinish an Old Wood Table Top: Tips and Tricks

Live edge wood tables top in Vancouver BC- Vakari Creations

Refinishing an old wood table top is a great way to give new life to a piece that is showing signs of wear and tear. Not only does it help your table look beautiful again, but it will also extend the lifespan of your furniture. Here, we provide tips on how to refinish an old wood table top so you can get the most out of your furniture.

Prepping The Surface

The first step in refinishing is prepping the surface for sanding. This means removing any screws, nails or staples that may be present as well as thoroughly cleaning off any dirt, dust or stains. Once you have removed all hardware and cleaned the surface, check for any cracks or splits in the wood—these should be filled with wood putty before continuing onto sanding.


Now that your surface is prepped and ready to go, it’s time to begin sanding down the old finish using a medium-grit sandpaper. Make sure to go with the grain of the wood and remove all excess dust particles before moving onto staining or finishing.


Staining helps bring out the natural beauty of your table top by adding color and depth to its grain patterns. Depending on what kind of look you want for your piece, you may choose between blotchy stains for more variation; or water-based stain if looking for a more uniform look. Before applying any stain, make sure that your surface has been properly cleaned and dried first!


Once you have stained your table top, it’s time to apply a protective finish such as varnish, lacquer or polyurethane in order to keep it looking great over time and protect against water damage. It’s important to read up on which types are best suited for indoor/outdoor use depending on where your table may be located—and always remember to apply two thin coats rather than one thick one!

Maintenance Tips

Good maintenance is key when it comes to preserving the longevity of an old wood table top – wax regularly (every few months) using a soft cloth; stay away from harsh chemicals when cleaning; and avoid leaving liquids sitting overnight on its surface as this could cause discoloration or warping in time!

One final tip to keep in mind when refinishing a wood table top is to be patient. This is a time-consuming process that requires a lot of attention to detail and a steady hand. Take your time, and be sure to work carefully and methodically to ensure the best possible results.

With a little bit of patience and attention to detail, you can transform an old, worn-out wood table top into a beautiful, like-new piece of furniture. Remember to take your time, choose the right materials, and work carefully to achieve the best possible results. Happy refinishing!

The Benefits of Investing in a Quality Wood Table Top

Round Epoxy Coffee Wood Table Top in Delta

When it comes to furniture, there are few materials as versatile and beautiful as wood. Whether you’re looking to buy an entire set of furniture or just a single wood table top, investing in quality wood can bring a wealth of benefits. Here, we discuss some of the key advantages of investing in high-quality wood table tops.


High-quality wood furniture is built to last and its durability makes it a great long-term investment. With proper care and maintenance, a quality wood table top can stay looking beautiful for many years.


Wood is one of the most versatile materials for furniture; not only does it come in many different types (oak, walnut, cherry etc.), but it can also be stained or painted with ease. This means that you can easily transform your furniture without having to purchase new pieces or take on complex DIY projects.

Aesthetic Appeal

Nothing quite compares to the timeless beauty of natural wood grain patterns which can add charm and elegance to any space—whether indoors or outdoors! And because each piece is unique due to variations in grain patterns, no two pieces ever look exactly alike—so you always get something special that no one else has!

Environmentally Friendly

High-quality wood tables are more environmentally friendly than other materials such as plastic which require large amounts of energy and resources to produce. Wood tables are also biodegradable at the end of their lifecycle making them even more sustainable!

Low Maintenance

Unlike other materials like plastic or metal which require frequent cleaning and polishing, wooden surfaces can be easily wiped clean with a damp cloth if they become dirty. Additionally, waxing your wooden surfaces every few months will help keep them looking beautiful for longer periods of time!

Lastly, a quality wood table top is an investment that will appreciate over time. As the wood ages, it will develop a unique patina and character that will make it even more beautiful and valuable. This makes it an excellent choice for those looking to add a timeless piece of furniture to their home or business.

Overall, investing in a quality wood table top is a smart decision for any homeowner or business owner. Not only do these tables add a sense of warmth and elegance to a room, but they also offer a number of practical benefits that make them a worthwhile investment in the long run.

How to Choose the Best Wood Table Top

When it comes to furniture shopping, there are many factors that should be considered before making a purchase. One of the most important is selecting the right material for your needs. When it comes to wood table tops, here are some tips on how to choose the best option.

Consider Your Space

When selecting a wood table top, it’s important to take into account the size and shape of your space as well as other elements that may affect the look and feel of your room. For example, if you have a smaller dining area, an oval or round table with an unfinished edge can give the illusion of a larger area; whereas in a large space an unfinished edge will create warmth and depth.

Rustic Wood tables top in Vancouver BC- Vakari Creations

Take Into Account Your Lifestyle

Your lifestyle can also play a role in deciding which type of wood table top works best for you. For instance, if you have small children or pets running around the house then solid hardwoods like oak or cherry might not be suitable—instead look into softer woods such as pine or maple which are more resistant to scratches and dents caused by everyday wear-and-tear.

Know Your Budget

Wood tables come in a variety of price points so make sure you know what your budget is when shopping around. Generally speaking, higher quality woods such as mahogany or teak tend to cost more but they do offer greater longevity over cheaper alternatives like pine or cedar (which are still great options!).

Look For Craftsmanship Details

The craftsmanship behind each piece can make all the difference when choosing a wood table top – details such as hand-crafted carvings and edge finishes can add character and value to any table top! It’s also important to make sure that all joinery has been done properly — usually this means checking for glue residue along edges where two pieces have been joined together as well as inspecting for any misaligned nails/screws/staples etc., which could potentially weaken the structure of your furniture.

Another important factor to consider is the finish of the table top. Different finishes can enhance the natural beauty of the wood and protect it from damage, but some finishes may be more durable than others. A polyurethane finish, for example, is a popular choice for table tops because it is durable and easy to clean, but it may yellow over time. A hard wax oil finish is another option that is more natural and will not yellow over time, but it requires more maintenance.

Finally, consider the size and shape of the table top. If you’re looking for a specific size or shape, such as a round or oval table top, be sure to choose a wood that can be easily cut and shaped to your specifications.

Ultimately, the best wood table top for you will depend on your personal style, the function of the table, and the overall feel of the room. By considering these factors, you can choose a table top that will add both beauty and functionality to your space.

Solid Wood Table Tops: A Durable and Elegant Choice for Your Home

If you are looking for the perfect table top to complete your home, a solid wood table top may be the answer you are looking for. Wood tables provide a natural, classic look that is hard to replicate with other materials. Not only do they look beautiful in any home, but they are also incredibly durable, making them an excellent choice for both indoor and outdoor usage.

But before you decide on a solid wood table top, it is important to consider all of your options in order to ensure that you get the most out of your investment. Here we will discuss the benefits of choosing a solid wood table top, as well as tips for finding one that matches perfectly with your existing décor.

Solid Wood Table Tops in Vancouver BC- Vakari Creations

Benefits of A Solid Wood Table Top

There are many advantages to choosing a solid wood table top over particleboard or veneer options. The first and foremost advantage being that it has proven its durability over decades of use in homes around the world. Solid wood does not warp or crack like its counterparts do over time because it is denser than other types of timber used in furniture construction.

Due to its strength, solid wood can be constructed into more ornate designs than other materials can be without fear of warping or weakening in time due to weight distribution or climate changes. This makes it suitable for any part of your home, regardless if you plan on using this piece outdoors or indoors.

Another benefit is that these tables often require minimal maintenance due to their natural durability and resistance against pests and hazards in different climates—a valuable consideration when planning ahead for long-term care and upkeep costs associated with furniture purchases!

Finally, even though solid wood tables cost more up front, they tend to last much longer compared to particleboard or veneer choices; thus providing greater value over the lifetime of ownership.

Where To Find The Perfect Table Top

When shopping for a new solid wood table top, there are several features you should consider before making a final decision: type of wood, size/shape/height constraints (for example – some surfaces require specific leg measurements), grain pattern selection (whether plain/straight grain versus cathedrals/curly grain) and any protective finishes such as lacquers/oils or sealants used on the surface itself. You should also check reviews from companies who offer these tops so you can get an honest opinion about their quality before making your purchase decision!

Additionally, it would be wise to measure the space where the table will be placed so that you’ll know exactly what size will fit best before considering any particular model – while standard tables come in common sizes like 4 x 6 feet etc., customizing one based upon exact specifications could prove beneficial if needed!


A solid wood table top is an excellent choice if you’re looking for robustness combined with natural beauty which will last through years of wear and tear while adding aesthetic value to your home! It requires minimal maintenance too – just be sure to choose one based upon features mentioned above as well as feedback from reputable businesses offering them before taking plunge into buying one!

How to Measure for Kitchen Cabinets - A Step-By-Step Guide

When measuring for kitchen cabinets, there are several things to consider, from the length of the wall to the height of the ceiling. Understanding the various factors that go into planning your kitchen layout will help you avoid costly mistakes. However, this does not mean you have to be a professional to get it right. With a few simple tools and a little know-how, you can achieve the same result without spending a dime.

In general, there are two main kinds of kitchen cabinets. The upper wall cabinets, which hang about 18 inches above the countertop, are designed to provide a workspace and are installed first. These are also the cabinets that need to be laid out around the room.

Kitchen Cabinet Door Styles in surrey BC- Vakari Creations

To measure for kitchen cabinets, start by taking a rough measurement of the width of the wall. This will give you a starting point for further measurements. You should also record the length of each wall segment. It may also be useful to mark the location of windows and doors on the drawing.

A second important measure is the length of the countertop. You’ll need this information to ensure your cabinets are level and plumb. There are a number of ways to measure this, including using a carpenter’s level, painter’s tape, or a tape measure.

Using a measuring tape, you should try to make a straight line from the front of the counter to the back of the cabinet. Ideally, the back should be flush with the counter. If this isn’t possible, you may need to shim.

Next, you’ll need to identify the best way to measure the length of the floor. Measuring the length of a wall is not as precise as it sounds. But the correct measurement can make your life easier. Depending on the size of the room, you may need to go in smaller segments. For instance, if your counters are long, you can use the 3-4-5 rule.

Among the other measures, a good measurement should include a mention of the obvious, such as the best kitchen cabinet. You may want to consider buying a stud finder to find the location of your walls. Although it may not be as precise as a tape measure, it can be useful. Some manufacturers have special washer-head screws that can be used to mount your cabinet to the studs.

Once you’ve identified the best way to measure for kitchen cabinets, it’s time to begin laying them out. Before you do, however, you’ll need to determine where each cabinet will be placed. Use the 3-4-5 rule or other guidelines to determine how much space each cabinet will take up. While you’re at it, you may also need to measure the distance between each cabinet.

Finally, you’ll want to measure the distance from the highest point in the room to the lowest point. This will let you know if the cabinets will be overhanging the counter or not. Likewise, you should be able to find out if the cabinets will be recessed in the ceiling or if they’ll be flush with the floor.

Types of Kitchen Cabinets

Modern Kitchen Cabinets in Delta BC- Vakari Creations

If you have decided to upgrade your kitchen, one of the first things you will want to consider is the style of your kitchen cabinets. You can choose from four main types of cabinet construction, each with its own benefits and drawbacks. These include:

Shaker-style cabinets: This type of cabinet is very popular, and is a great choice for a contemporary kitchen. The simple lines and clean design of this cabinet are ideal for modern kitchens. There are a variety of shaker styles, from classic to sleek. Typically, a Shaker cabinet is made of five pieces of flat panel. Each segment of the door has a simple flat panel with a simple edge and minimal ornamentation. They are typically finished with light colors or simple paint to maintain the natural look of the wood.

Beaded inset cabinetry: Another type of face-framed cabinet, beaded inset cabinetry features uniform beading and rounded edges inside the wood. It can be attached to the face frame, or drilled out of it. Generally, the drawer fronts are inset, meaning that they sit directly into the face frame.

Particle board: For a more durable cabinet, particle board is an ideal material. Because it is composed of polymer resins, it is water-resistant and can withstand scratches and other damage. Compared to plywood, the tolerances for particleboard screw fasteners are tighter.

Solid wood: Usually, solid wood cabinets are expensive, and they can be difficult to maintain. Wooden cabinets are prone to scuffs and stains. To prevent the appearance of scuffs, consider a satin finish instead of a matte one. Also, remember to polish the cabinets regularly. However, solid wood is more prone to warping from moisture, and this makes it a less-than-ideal choice for kitchens that will be remodeled frequently.

Frameless: Cabinets that are frameless have doors that are mounted on the side or on the bottom of the cabinet. This allows the drawer boxes to be sized to the interior opening. Unlike face-frame cabinets, frameless cabinetry is also minimalist in style.

Ready-to-assemble (RTA): RTA cabinets come ready to assemble. They are usually shipped to the residence and include instructions and parts. Manufacturers can also provide replacement components.

Kitchen cabinets are an essential part of any kitchen, and choosing the best style for your home can be a daunting task. Thankfully, there are plenty of different kitchen cabinets to choose from, and you can even order them online! Many companies offer free samples of the door fronts to see before you make your final purchase. Even if you don’t buy them right away, the fronts are often refundable.

If you are still confused about which kitchen cabinet style to choose, take a look at some of these tips to help you find the perfect cabinet for your home. From shaker to high-gloss, there are plenty of ways to dress up the kitchen while maximizing its function and value.

A full-height cabinet will give you the most storage space and create a dramatic vertical look. Depending on how much room you have, a tall cabinet may require customizing.

Choosing the Right Materials for Your Kitchen Cabinets

Live Edge Kitchen Cabinets in surrey BC- Vakari Creations

Choosing the right kitchen cabinets can make a huge difference in your home’s overall appearance. The best cabinet materials are durable, strong, and easy to maintain. A high-quality cabinet should last about 20-30 years. However, if you choose a low-quality option, you may face aesthetic issues, functional problems, and increased maintenance costs.

Plywood is a common material used to make cabinet carcasses. Plywood has numerous benefits, including its durability, strength, and resistance to moisture. It is also flexible, making it an excellent choice for cabinets that will be moved from place to place.

Particle board is another popular cabinet material. Particle board is made of recycled wood products and is typically sealed with a layer of laminate. This gives the boards a smooth even grain and is more resistant to warping than solid wood. It is also less expensive than hardwood. Nevertheless, its advantages are limited.

The most notable advantage of particle board is its low cost. Nonetheless, the downsides include its fragility and difficulty to repair. The screws on a particleboard cabinet can loosen from over-torque. It is also susceptible to crushing. In addition, particleboard isn’t a long-term solution.

Hardwood, on the other hand, is a natural material with a distinctive look and feel. It is also easy to work with, making it a great choice for a high-quality cabinet. In addition, hardwood cabinets are durable, making them an investment worth holding on to. Depending on the species, a hardwood kitchen cabinet can vary in color and style.

Another option is medium-density fiberboard, or MDF. MDF is made from small, recycled fibers that are pressed together in a high pressure system. This is similar to particleboard, but MDF is a more durable material. The advantages of MDF are its resistance to moisture, its attractive appearance, and its ability to be repainted. It is also inexpensive, making it a great option for low-priced kitchen cabinets.

The most popular style of cabinet today is the Shaker-style. This style is characterized by five pieces of flat panel that create a frame. The doors are mounted on either the bottom or the side of the cabinet. It features simple lines and recessed lines. It’s a popular choice due to its classic look and simplicity. It’s also an option for a unique and trendy kitchen.

Other styles include the Handle-Free, Flat-Front, Raised-Panel, and Beadboard. Each style has its own pros and cons. For instance, the Flat-Front style lacks beveling and ornamentation. Similarly, the Handle-Free style doesn’t have vertical stiles and doesn’t have the panels of the other styles. The Beadboard style uses uniform beads, while the Raised-Panel style has raised center panels.

Finally, the glazed cabinet treatment is going the way of the dodo with the rise of textured looks. Paint is an effective way to highlight the grain of a wood without showing off dirt and fingerprints. It is typically applied with a spray gun. The satin finish hides fingerprints better than a matte finish.

How to Organize Your Kitchen Cabinets for Maximum Efficiency

Kitchen Cabinets for Maximum Efficiency in Vancouver BC- Vakari Creations

Organizing your kitchen cabinets for maximum efficiency involves more than just labeling and labeling. You need to organize your cooking equipment and supplies, as well as your cleaning products. But the best way to get organized is by first identifying your needs. Then, you can figure out where to put things.

Using drawer dividers and other organizing tools is a must. These are inexpensive and can keep your kitchen cabinetry tidy. This will save you time and energy when you have to reorganize your kitchen. There are many ways to use a drawer divider, from simple utensil storage to labeling and organizing your utensils. Having a designated area to store baking supplies will allow you to easily access the ingredients you need for your favorite recipes.

To properly organize your kitchen cabinets, you need to consider your personal needs and work style. For example, if you cook a lot, it’s likely that you’ll need more storage space than a cook who only uses their oven a few times a week. A shelf maximizer can allow you to fit mini shelves on top of larger ones.

It’s also important to make sure you actually have enough space in your kitchen cabinets. If you don’t, you may end up cluttering your cupboards with unnecessary items. Don’t be afraid to dispose of unwanted items. Not only will you make your life easier, you will also reduce the chance of household pests.

Getting rid of old junk can also improve your organizational skills. When you’re cleaning out your cabinets, you might be surprised at the number of things you don’t use. Consider donating any items you don’t need or that are in a poor state. Even if you’re not ready to part with your beloved crockpot, there’s a good chance you can find a home for it.

As you’re purging your cabinets, it’s also worth the effort to get your kitchen to look as clean as possible. This includes sweeping up any crumbs and dust from around your cabinets. Cleaning your cabinets will improve the overall look of your home and allow you to maintain the quality of the food you prepare.

A well organized kitchen will save you time and stress during meal preparations and cleanup. One of the most challenging aspects of organizing a kitchen is the amount of items you have to sort through. However, if you follow these simple steps, you’ll be able to streamline your kitchen and create a well-organized space for your family.

Organizing your kitchen cabinets can be tricky, but with a little planning and a few helpful tools, you’ll be able to get it done in no time. And the best part is you’ll be able to enjoy the benefits of a more efficient and functional kitchen for years to come.

Organizing your kitchen cabinets is an ongoing process. Identify your needs, determine the size and layout of your cabinets, and then take action. Getting your kitchen in shape will not only help you cook better, but it will also help you avoid wasting time looking for misplaced appliances.

How to Select and Maintain a Wood Countertop

Using a wood countertop is a popular way to enhance the look of your kitchen. It offers a warm, inviting feel and works well with many styles. They are also durable and easy to maintain. However, you will need to take certain steps to ensure that your wood countertop lasts as long as possible.


A wood countertop can be made from a variety of materials. Some of the more popular choices include oak, maple, walnut and cherry. These hardwoods are renewable and durable, and they add a natural appeal to your kitchen. Other options, such as bamboo and wenge, are on the rise because of their flat grain and durability.


These wood countertops are available in a variety of designs, including butcher block, end grain, and face grain. There are also several edge treatments, such as live-edge or natural edge. These are often preferred in rustic kitchens.

Natural Wood Counter top Vancouver BC- Vakari Creations

One downside to these wood countertops is that they are not heat resistant. This means that you should avoid putting hot pans on them or using them with dishwashers. You can protect your counters from heat damage by placing a trivet on top of the surface. Alternatively, you can use a diffusion barrier to prevent moisture from damaging your counters.


If you are planning to put your wood countertop in a humid area, you should take the proper steps to remove any standing water. Additionally, you should wipe down the surface regularly to prevent bacteria from developing. You should also sand down any stains and discoloration on the surface. This will not only improve the look of your wood countertop, but it will make it less prone to deterioration.


When selecting a wood countertop, it’s important to determine what you want to use it for. If you plan to cut or prepare food, then you will want a wood countertop that is scratch-resistant and will hold up to heavy use. If you don’t plan to use the counter for heavy cooking, then you should consider a lighter-colored wood. For example, birch is a durable and hard-wearing wood that is available in a range of colors.


If you’re looking for a wood countertop that requires minimal maintenance, black walnut is a great option. This wood is highly scratch-resistant and will last for generations. However, you will need to re-oil the surface periodically to help prevent wear and tear. Similarly, tigerwood, which is also known as Brazilian koa, is a dense wood that is best suited for butcher block counters. It is also extremely durable and can withstand termite attacks.


You will find that wood countertop suppliers will be able to recommend which types of wood are the most suitable for your home. This will depend on your specific needs, including the color of your cabinets, the space in your kitchen, and the level of maintenance you can afford. You can also ask a supplier to provide you with an estimate of how much your wood countertop will cost. This will save you from spending a fortune on the wrong material.


Add a Custom Wood Countertop to Your Home

Add a Custom Wood Countertop to Your Home

Whether you are remodeling your kitchen, updating your bathroom or just looking for a way to add a little rustic charm to your home, a custom wood countertop can help you achieve your design goals. These counters are soft and flexible, which means they are easy to maintain. They can also be refinished if necessary. They offer a wide range of options and can blend with any type of floor or wall color, making them a great addition to any home.


When choosing a wood for your countertop, you will need to take into consideration a number of factors. You will need to choose a wood that is sustainably grown. You will also want to make sure the wood is food safe. You will also need to consider the finish that is used. For example, if your countertop is going to be used for cutting, you will need a food-safe “Natural Oil” finish. A mineral oil finish is not as effective at preventing wood from drying out, which can make it harder to keep clean.

Wood countertop slab in Delta BC- Vakari Creations

You will also want to choose the proper support for your countertop. If you are installing your countertop on top of a cabinet, you will need to use a solid support, such as a wall cleat. The support will need to be sturdy and long enough to hold the weight of your countertop.


You can also add a modern twist to your kitchen by installing a custom wood countertop. These countertops are made from various types of wood and come in a wide range of construction styles. They can be used as bathroom countertops, dining room tables, or even accent walls. They are durable, attractive, and are a great way to add a touch of natural beauty to your home. They are easy to install and they can be recycled when they reach their maximum lifespan.


To ensure that your wood countertops will last, you will need to re-oil them at least once a month. This will protect your countertop and keep it looking beautiful. You can apply Tung-oil, a food-safe natural oil, or mineral oil. Tung-oil will take more time to clean, but it has a matte appearance that is more desirable than mineral oil.


If you are looking to buy custom wood countertops, you will need to be sure that you are choosing a material that is sustainable. The materials should be FSC certified, and you should also be aware of how the wood was harvested. You will also need to know how much it costs. Depending on the size of your custom wood countertop.


When it comes to choosing the best wood for your countertop, you will need to consider the thickness of the wood. You will also need to be aware of how much warping the material can experience. You should also take into account the color of the wood. Certain wood species will have random grain variation, which can cause differences in the color of the boards.


How to Select and Maintain a Wood Countertop


Choosing a Wood Countertop